Installation Steps
1. Drill the hole perpendicular to work surface using masonry bit, same diameter as anchor being installed.
2. Preset the nut for desired embedment.
3. Hammer the center pin until it is aligned with the top of the bolt. Anchor is now properly set.
4. Tighten the nut, no need to torque the nut.
Technical Details
Size (mm) | Thread Length (mm) | Drill Diameter (mm) | Min. Embed (mm) |
6 x 45 | 15 | 6 | 28 |
8 x 50 | 20 | 8 | 32 |
10 x 50 | 20 | 10 | 32 |
10 x 70 | 25 | 10 | 45 |
12 x 70 | 25 | 12 | 45 |
12 x 100 | 30 | 12 | 65 |
16 x 100 | 35 | 16 | 65 |
16 x 120 | 40 | 16 | 75 |
20 x 130 | 50 | 20 | 75 |